Thin and soft bristles like newborn hair! Good paint uptake and prevents brush strokes!

Brushwork Softest Filbert Brush is available in two types, M and L, depending on brush tip thickness.
The [L] brush is 7 mm in width with a bristle length of 10 mm, which is convenient for painting large, broad surfaces.
The non-angular shape of bristles disperses the force, providing a gentle touch and less likely to affect the surface undercoat. It’s ideal for painting figures’ clothes and skin.
Thanks to its extra-soft bristles, brush strokes are less likely to stick to the surface, allowing a smooth application of thin paint films.

● Softest series brushes with softer bristles compared to standard Brushwork PRO.
Brushwork PRO is a delicate paintbrush with each bristle made by a brush craftsman specializing in synthetic bristles.
Unlike ordinary synthetic fiber brushes, the bristles do not dry out and break off easily, keeping bristles always soft and new.
You can apply smoothly even water-based paints with soft paint films and prevent scraping off the paint film with the brush tip.
Ideal for spreading paints such as special paints and water-based paints with a thin finish.

The bristles are pure Japanese-made synthetic bristles (PBT). Both water-based and solvent-based paints are applicable with confidence.
Each brush is hand-made by Japanese brush craftspersons who specialize in synthetic bristles.
Animal hair brushes tend to become damaged, torn, and dry when soaked in solvents, but Brushwork PRO’s PBT bristles are solvent-resistant and less prone to damage.
The bond that holds the brush tip in place is also solvent-resistant, ensuring a long-lasting good brush tip.
The brush tip is more flexible than general chemical fiber brushes due to the firmness adjusted for easy brush painting on models.
An assorted range of brush tip shapes for use in different painting situations.
Short brush tip has a lower water supply for the paint, causing the paint to dry quickly.
This is why Brushwork PRO has designed the brush tip length to achieve ease of painting and paint absorbency.
Thanks to the special processing PBT bristles, bent bristles become straight again with hot water at 90℃.
Exclusive aluminum cap for storage.

● How to fix a brush with bristles bent out
Remove any dirt from the brush before soaking it in hot water.
*Please be careful of burns when using hot water.

1. Fill a heat-resistant container with hot water at 90℃, and soak the bent brush tips for about 10 seconds.
2. Use the sides of the container to straighten out any bent bristles.
3. Pull the brush up along the side to keep it straight.
4. Check the bottom of the brush is straight and leave it to dry.

*For some bristles with a limited lifespan in use, it may not work.
*Note that if the water gets cold during the process, it may not work.